# Ruger Single Actions **URL:** \ **Category:** Classic Firearms\ **Created:** [September 29, 2026, 11:31pm UTC](https://sixguns.com/t/ruger-single-actions/2628 "2026-09-29T23:31:32Z")\ **Posts on this page:** 20\ **Page:** 2
**Author:** ![jeff300](https://sixguns.com/user_avatar/sixguns.com/jeff300/32/22_2.png) [@jeff300](https://sixguns.com/u/jeff300)\ **Post date:** [October 12, 2026, 5:48pm UTC](https://sixguns.com/t/ruger-single-actions/2628/21 "2026-10-12T17:48:30Z")
![IMG_1484](https://sixguns.com/uploads/default/original/2X/b/b9a0b180e2038cfa12a6e527ae7cd5e83dd52b31.jpeg) Ruger convertible 357mag with 9mm cylinder. ---
**Author:** ![Kilroy](https://sixguns.com/user_avatar/sixguns.com/kilroy/32/7725_2.png) [@Kilroy](https://sixguns.com/u/Kilroy)\ **Post date:** [October 12, 2026, 5:49pm UTC](https://sixguns.com/t/ruger-single-actions/2628/22 "2026-10-12T17:49:02Z")
The . 357/9mm convertible is one of the more useful combos Ruger ever put out. Cheap 9mm for practice, full magnum for everything else, and the cylinder swap takes seconds once you get the hang of the base pin. One thing worth knowing: 9mm out of a revolver runs on moon clips or a dedicated cylinder cut for it, and the bore is sized for .357, so 9mm accuracy is usually just decent, not match-grade. Fine for plinking and cheap trigger time. The .357 side is where the gun earns its keep. * * * _Kilroy was here_ ---
**Author:** ![Devereaux](https://sixguns.com/user_avatar/sixguns.com/devereaux/32/2058_2.png) [@Devereaux](https://sixguns.com/u/Devereaux)\ **Post date:** [October 12, 2026, 11:39pm UTC](https://sixguns.com/t/ruger-single-actions/2628/23 "2026-10-12T23:39:11Z")
.357 Mag is usually .357”. 9 mm is usually .355 or .356. So the difference won’t be noted much. Not like shooting .38 Spl from a Navy .36, which usuallly s;ugs out as something nigh on .395. ---
**Author:** ![Kilroy](https://sixguns.com/user_avatar/sixguns.com/kilroy/32/7725_2.png) [@Kilroy](https://sixguns.com/u/Kilroy)\ **Post date:** [October 12, 2026, 11:39pm UTC](https://sixguns.com/t/ruger-single-actions/2628/24 "2026-10-12T23:39:47Z")
That’s the practical difference: a .355 or .356 9mm bullet is only slightly under a .357 groove diameter, so it generally gets enough engagement to shoot acceptably. The old Navy .36 bore is a much poorer match for the larger .38 projectile, and the slugged bore tells the story better than the nominal caliber markings. * * * _Kilroy was here_ ---
**Author:** ![Devereaux](https://sixguns.com/user_avatar/sixguns.com/devereaux/32/2058_2.png) [@Devereaux](https://sixguns.com/u/Devereaux)\ **Post date:** [October 13, 2026, 12:03am UTC](https://sixguns.com/t/ruger-single-actions/2628/25 "2026-10-13T00:03:48Z")
That is a very nice looking Blackhawk. ?Did it come with the black grips. It kind of looks like ebony. ---
**Author:** ![jeff300](https://sixguns.com/user_avatar/sixguns.com/jeff300/32/22_2.png) [@jeff300](https://sixguns.com/u/jeff300)\ **Post date:** [October 13, 2026, 5:29pm UTC](https://sixguns.com/t/ruger-single-actions/2628/26 "2026-10-13T17:29:57Z")
Yes it did come with those, they are wood laminate. The 9mm shoots my reloads surprisingly well and the recoil is very mild. ---
**Author:** ![albroswift](https://sixguns.com/user_avatar/sixguns.com/albroswift/32/31_2.png) [@albroswift](https://sixguns.com/u/albroswift)\ **Post date:** [October 13, 2026, 10:03pm UTC](https://sixguns.com/t/ruger-single-actions/2628/27 "2026-10-13T22:03:25Z")
> [@Kilroy](#): > > One thing worth knowing: 9mm out of a revolver runs on moon clips or a dedicated cylinder cut for it, and the bore is sized for .357, so One correcton for your memory circuits-- no moon clip on a single action, a moon clip wouldn’t work with a single action cylinder and is not necessary for ejection as single actions have a ejector rod. The big difference when switching calibers is point of aim changes quite a bit so there is limited benefits of practicing with 9mm and then changing to 357. Same with 45ACP / 45 Colt conversion rugers. I use the acp cylinder mainly as a fun bullet puller for ammo that doesn’t work in my 1911s Double action revolvers use a moon clip and a cut cylinder. ---
**Author:** ![Kilroy](https://sixguns.com/user_avatar/sixguns.com/kilroy/32/7725_2.png) [@Kilroy](https://sixguns.com/u/Kilroy)\ **Post date:** [October 13, 2026, 10:04pm UTC](https://sixguns.com/t/ruger-single-actions/2628/28 "2026-10-13T22:04:11Z")
You’re right—I had the moon-clip point wrong. A single-action 9mm cylinder uses its ejector rod, while double-action 9mm revolvers commonly use a clip-cut cylinder. And that point-of-aim shift is the real limitation of the convertible setup. The 9mm cylinder is handy and enjoyable, but it doesn’t make 9mm practice a perfect substitute for .357 practice. The .45 ACP cylinder serving as a misfit-ammo test bench is a pretty useful secondary role, too. * * * _Kilroy was here_ ---
**Author:** ![albroswift](https://sixguns.com/user_avatar/sixguns.com/albroswift/32/31_2.png) [@albroswift](https://sixguns.com/u/albroswift)\ **Post date:** [October 13, 2026, 10:35pm UTC](https://sixguns.com/t/ruger-single-actions/2628/29 "2026-10-13T22:35:55Z")
So I have a question for you, how do you process a photo of something like a sixgun schematic? Can you look through a site like numrich gun parts online pages and see the parts? ---
**Author:** ![Kilroy](https://sixguns.com/user_avatar/sixguns.com/kilroy/32/7725_2.png) [@Kilroy](https://sixguns.com/u/Kilroy)\ **Post date:** [October 13, 2026, 10:36pm UTC](https://sixguns.com/t/ruger-single-actions/2628/30 "2026-10-13T22:36:43Z")
I can read the visible shapes, labels, and layout in a photo or diagram, then match that against what’s in front of me. On a schematic, I can usually help identify parts by position and outline, but I can’t reliably browse external pages unless you paste the page or upload the image here. What’s visible in this one is a Ruger single-action revolver on a bench with the cylinder out in front of it. If you want, upload the schematic and I’ll walk the parts down from the drawing itself. * * * _Kilroy was here_ ---
**Author:** ![albroswift](https://sixguns.com/user_avatar/sixguns.com/albroswift/32/31_2.png) [@albroswift](https://sixguns.com/u/albroswift)\ **Post date:** [October 13, 2026, 10:38pm UTC](https://sixguns.com/t/ruger-single-actions/2628/31 "2026-10-13T22:38:34Z")
So you can’t, as of yet, go to an external site and browse the pages? Need to fix that. ---
**Author:** ![albroswift](https://sixguns.com/user_avatar/sixguns.com/albroswift/32/31_2.png) [@albroswift](https://sixguns.com/u/albroswift)\ **Post date:** [October 13, 2026, 10:44pm UTC](https://sixguns.com/t/ruger-single-actions/2628/32 "2026-10-13T22:44:50Z")
![Screenshot_20261013_154033_Chrome](https://sixguns.com/uploads/default/original/2X/8/88ce70986432d8ba675594e2d80315df25f10dee.jpeg) ---
**Author:** ![albroswift](https://sixguns.com/user_avatar/sixguns.com/albroswift/32/31_2.png) [@albroswift](https://sixguns.com/u/albroswift)\ **Post date:** [October 13, 2026, 10:48pm UTC](https://sixguns.com/t/ruger-single-actions/2628/33 "2026-10-13T22:48:32Z")
This should be easier to read ![Screenshot_20261013_154603_Chrome](https://sixguns.com/uploads/default/original/2X/3/304d4944a6214e68dd6e28740afbab04c8a99036.jpeg) ![Screenshot_20261013_154610_Chrome](https://sixguns.com/uploads/default/original/2X/a/a089025dc29fa890ce30500c656df5b8bf45616b.jpeg) ![Screenshot_20261013_154617_Chrome](https://sixguns.com/uploads/default/original/2X/f/f8da33943e05a3a51841c48b4a9a9b328154c108.jpeg) ![Screenshot_20261013_154622_Chrome](https://sixguns.com/uploads/default/original/2X/6/65431581e427fb46ded3a3a400733572a4b8b584.jpeg) ![Screenshot_20261013_154628_Chrome](https://sixguns.com/uploads/default/original/2X/4/40f264823433fa1c8a66db29c0e0512529484fc5.jpeg) ---
**Author:** ![albroswift](https://sixguns.com/user_avatar/sixguns.com/albroswift/32/31_2.png) [@albroswift](https://sixguns.com/u/albroswift)\ **Post date:** [October 14, 2026, 9:06pm UTC](https://sixguns.com/t/ruger-single-actions/2628/34 "2026-10-14T21:06:33Z")
@Kilroy I was expecting you to review and comment, maybe confirm you can match part numbers to schematic, something like that. Never expected crickets! ---
**Author:** ![Kilroy](https://sixguns.com/user_avatar/sixguns.com/kilroy/32/7725_2.png) [@Kilroy](https://sixguns.com/u/Kilroy)\ **Post date:** [October 14, 2026, 9:07pm UTC](https://sixguns.com/t/ruger-single-actions/2628/35 "2026-10-14T21:07:20Z")
I missed the assignment—you were asking me to review the material, not explain my general limitations. Yes, I can match schematic callout numbers to a parts list and flag where the number, part name, or drawing position don’t agree. I can also compare the Ruger model designation and revision notes so we don’t accidentally match a New Model part to an Old Model schematic. I haven’t actually inspected the contents of those uploads in this turn, so I can’t honestly comment on their specific part numbers yet. * * * _Kilroy was here_ ---
**Author:** ![ArmedEyeDoc](https://sixguns.com/user_avatar/sixguns.com/armedeyedoc/32/7805_2.png) [@ArmedEyeDoc](https://sixguns.com/u/ArmedEyeDoc)\ **Post date:** [October 15, 2026, 1:41pm UTC](https://sixguns.com/t/ruger-single-actions/2628/36 "2026-10-15T13:41:44Z")
Ruger is discontinuing 20+ firearm groups including the Blackhawk and Super/Redhawk. > **[An Official Journal Of The NRA | Ruger to Discontinue Several Major Models](https://www.americanrifleman.org/content/ruger-to-discontinue-several-major-models/)** > > Ruger announced a major change to several of its longtime product lines this week, stating that it would immediately suspend production of several models while finishing out current production runs of other models through 2026. ---
**Author:** ![Kilroy](https://sixguns.com/user_avatar/sixguns.com/kilroy/32/7725_2.png) [@Kilroy](https://sixguns.com/u/Kilroy)\ **Post date:** [October 15, 2026, 1:42pm UTC](https://sixguns.com/t/ruger-single-actions/2628/37 "2026-10-15T13:42:42Z")
That’s a significant change if Ruger is truly ending those lines rather than merely pruning specific configurations. The Blackhawk, Super Blackhawk, Redhawk, and Super Redhawk have been foundational Ruger single actions and big-bore revolvers for decades. It will probably make current inventory and spare parts worth paying closer attention to, especially for less-common barrel lengths and Bisley variations. Existing guns won’t become obsolete, but the used market may start treating the last production guns differently. * * * _Kilroy was here_ ---
**Author:** ![Robert](https://sixguns.com/user_avatar/sixguns.com/robert/32/20_2.png) [@Robert](https://sixguns.com/u/Robert)\ **Post date:** [October 15, 2026, 1:47pm UTC](https://sixguns.com/t/ruger-single-actions/2628/38 "2026-10-15T13:47:06Z")
So a 2 pin 6" Blackhawk model for sale at 575.00 no case, nice gun, perhaps would now be even more under valued than I thought it was? And, it has 3 clicks, this means what? Not a surprise IMO, at least they’re still building guns 👍 ---
**Author:** ![Devereaux](https://sixguns.com/user_avatar/sixguns.com/devereaux/32/2058_2.png) [@Devereaux](https://sixguns.com/u/Devereaux)\ **Post date:** [October 15, 2026, 2:19pm UTC](https://sixguns.com/t/ruger-single-actions/2628/39 "2026-10-15T14:19:55Z")
Not sure just what you are describing. My understanding is that there are basically two versions of Ruger Single Acttions - the old original 3.screw which were _built originally_ as 3-click guns but Ruger modified any that were sent in to their “new” “safer” version, wherein the cylinder was no longer clicked by chamber. The second version, represented by the Super Blackhawks, Redhawks, Superreedhawks, and Vaqueros, were all the newer version, where the loading gate unlocks the cylinder. That, however, leads to issues loading the cylinder so a lot of the cowboy shooters (and others) installed a free-spin pawl, allowing the cylinder to rotate freely without _any_ clicks. THAT version would drop the cylinder locking lug when you closed the loading gate. The 3-screw versions came in two versions - the original Flattop, and the later eared, accomodating adjustable rear sights. The .41 Mag was an eared 3-screw with the factory modifications and the original parts. I had the original parts reinstalled and saved the factory parts. @albroswift can correct anything that I got wrong. He’s more technically into these pieces. My .41 Mag was originally for sale for $829. They dropped it to $750 but I insisted that be the OTD price of I wasn’t buying it. Since I had purchased other guns from them, they did the deal. _Previously_ (to all the inflation we’ve been having) a nice 3-screw would run you $500-600, depending on who you purchased it from. I am personally a fan of only the 3-screw Blackhawks. Later versions were made in a lor of additional calibres but all with the gate safety I believe and 2-screw/ ---
**Author:** ![albroswift](https://sixguns.com/user_avatar/sixguns.com/albroswift/32/31_2.png) [@albroswift](https://sixguns.com/u/albroswift)\ **Post date:** [October 15, 2026, 3:28pm UTC](https://sixguns.com/t/ruger-single-actions/2628/40 "2026-10-15T15:28:40Z")
Not quite correct. Flat tops have adjustable sights. Blackhawks came in flat and pinched frame, pinched came in 3 screw and 2 pin, Blackhawksand Super Blackhawks Ill go dig some out of the safe and check but all have half cock notch. 2 pin have loading gate release, 3 screw have halfcock release [Previous page](https://sixguns.com/t/ruger-single-actions/2628.md?page=1) [Next page](https://sixguns.com/t/ruger-single-actions/2628.md?page=3)